Ageing Oven, EB 10
for ageing of rubber and plastic materials

Ageing oven for precision ageing of rubbers and plastics under controlled conditions. EB 10 is a
cabinet oven designed to give very low temperature variations in time and space, a low air speed
together with a controlled air exchange rate. This is achieved by using an inner chamber with a
controlled air flow. The air exchange rate is set by a throttle and is set for 7 or 12 changes per
hour before delivery. The oven has separate systems for temperature control and indication with
alarm.

EB 10 conforms to ISO 188, ISO 3383, IEC 811 and technical equivalent standards.

EB 10 can also be supplied with a 3 glass window and illumination of the inner chamber.

The oven is supplied in two sizes, with 60 and 120 l useful volume.

EB 10 is ideal for ageing finished products and large test pieces which are unsuitable for cell
ovens. Both shelves and rods are supplied with the oven for accommodating most types of
samples.


Technical Specification, Ageing Oven EB 10

Temperature range: 40 - 200 °C
Temperature control, 40 - 100 °C: ± 0,5 °C or better
101 - 200 °C: ± 1 °C or better
Temperature variation in time and space: ± 0,25 °C
Temperature sensors: PT 100, 1/3 DIN
Air speed: 0,001 m/s (at 10 changes/h)
Useful volume: 60 or 120 l
Dimensions, inner chamber, w x h x d 450 x 450 x 300 mm (60 l)
550 x 550 x 400 mm (120 l)
Dimensions, external, w x h x d 750 x 700 x 550 mm (60 l)
850 x 800 x 650 mm (120 l)
Dimension, window: (dia 250 mm, 3 glass) option
Shelf positions: 3
Shelves: 2
Illumination of the inner chamber: (12 V, 5 W halogen lamp) option
Weight: approx. 65 kg
Voltage: 220-240 V /1/50
Power: 1 400 W
Air changes: 7 ±3 changes/hour (ISO 188)
12 ±4 changes/hour (IEC 811)


- The oven meets with good margin, the requirements in ISO 188,
ISO 3383, IEC 811 and other equivalent standards.

- Special design with an inner chamber with controlled air
exchange rate and low air speed.

- The casing consists of steel, painted with epoxy powder paint in
bluegreen colour.

- The inner chamber is made of stainless steel.

- Temperature controller with 0,1 °C setpoint.

- Solid state relay for safe control.

- Temperature indicator with sensor in the inner chamber.

- Adjustable over and under temperature limits with alarm.

- Fixed over temperature fuse at 240 °C.

- Air speed is low and is dependent of the air exchange rate only.

- Cooling channels in the casing and window for low surface
temperature.

- Temperature controlled cooling fan for the electronics cabinet.

- Run-time meter

EB12
- A new version of the EB10 with high air speed (1m/sec) and controlled air-exchange rates (7 or
14 changes/hour) .Conforms to method B of ISO 188 (1999).
Useful sample area is only 50 litres.

ELASTOCON reserve the right to modify this specification in part or in whole.





96-04

Unit 1, The Woodyard

CASTLE ASHBY

Northampton

NN7 1LF

Telephone: 01604-696192

Fax: 01604-696198

E-Mail: techsales at nortest.co.uk