Cell Oven for ageing of rubbers and plastics under controlled conditions.EB 01 conforms to ISO
188, ISO 3383, IEC 811 and technical equivalent standards, the EB 01 Cell Oven is equipped
with four cells each having separate control of the air-exchange rate.

Technical Specification, Cell Oven, EB 01

Temperature range: 40 - 200 °C
Temperature control: 40 - 100 °C: ± 0,5 °C or better
(time and space) 101 - 200 °C: ± 1 °C or better
Temp. variation in time and space: ± 0,25 °C
Temperature sensors: PT 100, 1/3 DIN
Useful volume: 4 x 2,4 l
Cells: 4
Cell-dimensions, dia x h: 100 x 300 mm
Dimensions, external, w x h x d: 575 x 465 x 400 mm
Weight approx: 44 kg
Voltage: 220-240/1/50
Power: 900 W
Air Changes: 3 - 20 changes/hour
- The oven meets with good margin, the requirements in ISO 188,
ISO383, IEC 811 and other equivalent standards.

- The casing consists of steel, painted with epoxy paint.

- Specially designed band heaters for accurate temperature
control.

- Temperature controller with 0,1 °C setpoint.

- Solid state relay for safe control.

- Temperature indicator with sensor in one cell.

- Adjustable over and under temperature protection and alarm.

- Maximum temperature fuse at 240 °C.

- Cast Aluminium block with channels for preheating the air.

- Separate flowmeter for each cell.

- Alarm for low air pressure.

- Microfilter for the air, which removes 99,99 % of all particles and vapours over 0,1 µm.

- Cooling channels in the casing for low surface temperature.

- Run-time meter.

ELASTOCON reserve the right to modify this specification in part
or in whole.

96-04

Unit 1, The Woodyard

CASTLE ASHBY

Northampton

NN7 1LF

Telephone: 01604-696192

Fax: 01604-696198

E-Mail: techsales at nortest.co.uk